Day: October 20, 2020

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.40117-63-3, Quinuclidine-4-carboxylic acid hydrochloride it is a common compound, a new synthetic route is introduced below.40117-63-3

1. Preparation of 3-fluorobenzyl quinuclidine-4-carboxylate (Compound 91). A mixture of quinuclidine-4-carboxylic acid hydrochloride (100 mg, 0.52 mmol) and thionyl chloride (500 mul, 6.85 mmol) was refluxed for 2 hours. The reaction was cooled to room temperature, and the solvent was accurately removed. The residue was suspended in dry DCM and treated with (3-fluorophenyl)methanol (65.8 mg, 0.52 mmol). The reaction was stirred at room temperature for 24 hours. The solvent was evaporated, and the residue was dissolved in water (1 ml), basified with NaHCO3 and extracted twice with EtOAc. The combined organic layers were dried over Na2SO4, filtered, and evaporated to obtain 3-fluorobenzyl quinuclidine-4-carboxylate (41 mg, 29.8% yield), which was used in the next step without any further purification.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand Quinuclidine-4-carboxylic acid hydrochloride reaction routes.

Reference£º
Patent; Chiesi Farmaceutici S.p.A.; US2012/276018; (2012); A1;,
Quinuclidine – Wikipedia
Quinuclidine | C7H13N | ChemSpider

40117-63-3, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.”40117-63-3

(Quinuclidin-4-yl)carboxylic acid was prepared from 4-cyanoquinuclidine (Oakwood Products) following the procedure of Grob and Renk, Helv. Chim. Acta, 37, 1681 (1954). To a stirred suspension of quinuclidine-4-carboxylic acid hydrochloride (100 mg, 0.523 mmol) in 3 mL of anhydrous tetrahydrofuran at 0 C. was added borane methylsulfide complex (42 mg, 0.553 mmol). The mixture was stirred at room temperature for 1 hr and heated to reflux overnight. The reaction was cooled to 0 C. and carefully treated with 1 mL of methanol. The solvent was then removed under reduced pressure to leave the desired alcohol. Yield 36 mg. MS (m/e): 141.

The chemical industry reduces the impact on the environment during synthesis, 40117-63-3, , I believe this compound will play a more active role in future production and life.

Reference£º
Patent; CoMentis, Inc.; BILCER, Geoffrey M.; NG, Raymond; (104 pag.)US2016/9706; (2016); A1;,
Quinuclidine – Wikipedia
Quinuclidine | C7H13N | ChemSpider

22766-68-3, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.”22766-68-3

To a solution of ethyl 1-aza-bicyclo[2.2.2]octane-4-carboxylate (PCT2005104745) (9.610 g, 52.44 mmol) in THF (480 ml) at -780C was added borane-THF complex (73.41 ml,73.41 mmol) and the resulting solution was stirred at this temperature for 3.5 h. The reaction was quenched with slow addition of H2O (50 ml), warmed to RT, and allowed to stir for 45 min. The solution was diluted with EtOAc (100 ml), washed with brine (15 ml), extracted with EtOAc (3 x 50 ml), dried (Na2SO4) and evaporated. The crude product was purified on a CombiFlash companion using 0-50% EtOAc in cyclohexane as eluent to give a bright yellow solid.Yield: 7.236 g (70%)1 H NMR (400 MHz, CDCI3) delta = 4.15 (q, 2H), 3.07 (t, 4H)1 1.96 (t, 4H), 1.26 (t, 3H) ppm.

The chemical industry reduces the impact on the environment during synthesis, 22766-68-3, I believe this compound will play a more active role in future production and life.

Reference£º
Patent; ARGENTA DISCOVERY LIMITED; WO2009/60206; (2009); A1;,
Quinuclidine – Wikipedia
Quinuclidine | C7H13N | ChemSpider

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.22766-68-3, Ethyl quinuclidine-4-carboxylate it is a common compound, a new synthetic route is introduced below.22766-68-3

1-Azabicyclo[2.2.2]oct-4-yl(diphenyl)methanol A solution of phenyllithium (1.5-1.7 M in 70 cyclohexane/30 ether, 20.0 mL, 32 mmol) was chilled down to -30 C. under Ar. Ethyl 1-azabicyclo[2.2.2]octane-4-carboxylate (1.51 g, 8.23 mmol) in THF (20 mL) was slowly added to the reaction mixture at -30 C. over 25 min. The reaction was allowed to warm up to room temperature over 16 h. The reaction was quenched with H2O and then evaporated to dryness under vacuum. H2O and EtOAc were added, causing a white solid to crash out. This solid was filtered off, to give the title compound (0.79 g). The aqueous phase was further extracted with EtOAc, the combined organic layers were dried over MgSO4, filtered, and concentrated under vacuum. The crude product was treated with EtOAc and hexane and filtered to yield more of the title compound (0.67 g). Total yield (1.46 g, 60.7%). EI-MS m/z 294(M+H+) Rt (1.37 min).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand Ethyl quinuclidine-4-carboxylate reaction routes.

Reference£º
Patent; Laine, Damane I.; Palovich, Michael R.; McCleland, Brent W.; Neipp, Christopher E.; Thomas, Sonia M.; US2007/185155; (2007); A1;,
Quinuclidine – Wikipedia
Quinuclidine | C7H13N | ChemSpider

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.40117-63-3, Quinuclidine-4-carboxylic acid hydrochloride it is a common compound, a new synthetic route is introduced below.40117-63-3

Step 4. Quinuclidin-4-ylcarbonyl chloride hydrochloride Quinuclidine-4-carboxylic acid hydrochloride (0.192 g, 0.001 mole) was suspended in dichloromethane (5 ml) and dimethylformamide (1 drop) and oxalyl chloride (0.436 ml. 0.635 g, 0.005 mole) were added. The resulting suspension was heated to reflux under an atmosphere of argon for six hours. Following concentration of the suspension in vacuo the residue was suspended in dichloromethane, concentrated in vacuo and finally dried in vacuo to give the title compound as a pale brown solid.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand Quinuclidine-4-carboxylic acid hydrochloride reaction routes.

Reference£º
Patent; SmithKline Beecham p.l.c.; US6281226; (2001); B1;,
Quinuclidine – Wikipedia
Quinuclidine | C7H13N | ChemSpider

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.22766-68-3, Ethyl quinuclidine-4-carboxylate it is a common compound, a new synthetic route is introduced below.22766-68-3

Example 32 Preparation of 1-butyl-4-[hydroxy(di-3-thienyl)methyl]-1-azoniabicyclo[2.2.2]octane bromide A solution of n-Butyl lithium (2.5M in hexanes, 5.0 mL, 12.5 mmol) was chilled to -78 C. under Ar. 3-Bromothiophene (1.15 mL, 12.3 mmol) dissolved in ethyl ether (4.0 mL) was slowly added to the reaction mixture. The reaction was stirred for 30 min and then ethyl 1-azabicyclo[2.2.2]octane-4-carboxylate (0.7640 g, 4.16 mmol) in THF/Et2O (4 mL/4 mL) was added. The reaction was allowed to warm up from -78 C. to room temperature over 16 h then slowly quenched with water. The reaction was concentrated and the resulting brown solid was taken up in water and DCM. The organic phase was separated, dried over MgSO4, filtered and concentrated under vacuum to give a brown solid. The solid was dissolved in DMSO and purified by preparatory HPLC to give the title compound (0.1736 g, 9.4%). EI-MS m/z 362(M+) Rt (1.73 min)., 22766-68-3

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand Ethyl quinuclidine-4-carboxylate reaction routes.

Reference£º
Patent; Laine, Damane I.; Palovich, Michael R.; McCleland, Brent W.; Neipp, Christopher E.; Thomas, Sonia M.; US2007/185155; (2007); A1;,
Quinuclidine – Wikipedia
Quinuclidine | C7H13N | ChemSpider

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.22766-68-3, Ethyl quinuclidine-4-carboxylate it is a common compound, a new synthetic route is introduced below.22766-68-3

Step 1. A solution of 4-carbethoxyquinuclidine (10.92 g) in THF (155 mL) was treated at-780C with borane-THF (1.0 M, 77.5 mL). The resulting mixture was stirred at -78C for 4 h, then treated with water (50 mL), warmed to room temperature and stirred for an additional hour. The reaction mixture was diluted with ethyl acetate and the aqueous phase was separated and extracted with two further portions of ethyl acetate. The combined organic layers were washed with brine- (twice), dried (MgSO4), filtered and evaporated in vacuo. Purification by silica gel chromatography (eluting with cyclohexane-ethyl acetate [1 :0 to 1 :1]) gave 1-boranyl-1-aza-bicyclo[2.2.2]octane-4- carboxylic acid ethyl ester (7.12 g, 61%) as an off-white solid. 1H NMR (400 MHz, CDCI3) delta 4.16 (2H1 q, J = 6.9), 3.10-3.05 (6H1 m), 1.98-1.93 (6H, m), 1.26 (3H, t, J = 6.9).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand Ethyl quinuclidine-4-carboxylate reaction routes.

Reference£º
Patent; ARGENTA DISCOVERY LIMITED; WO2008/99186; (2008); A1;,
Quinuclidine – Wikipedia
Quinuclidine | C7H13N | ChemSpider

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.40117-63-3, Quinuclidine-4-carboxylic acid hydrochloride it is a common compound, a new synthetic route is introduced below.40117-63-3

Under the protection of nitrogen, phenyllithium (1.5 – 1.7M cyclohexane/diethyl ether solution (70:30), 30.0 ml, 48.00mmol) solution cooled to -30 C, in -30 C under, 0.5 hours slowly dropping WD2 (2.27g, 12 . 35mmol) of THF (30 ml) solution to the reaction mixture. The reaction liquid heating to room temperature reaction 16 hours, adding water quenching reaction, mixed solution under vacuum to evaporate to dry, adding water and ethyl acetate, to obtain white solid to settle out, filtering to obtain solid, shall WD1 (1.19g). The aqueous phase is further extracted with ethyl acetate, the combined organic layer was dried with anhydrous sodium sulfate, filtered, concentrated under reduced pressure to get the crude product, the crude product of ethyl acetate and hexane processing, filtering to obtain WD1.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand Quinuclidine-4-carboxylic acid hydrochloride reaction routes.

Reference£º
Patent; Sichuan Hai Sike Pharmaceutical Co., Ltd.; Yi Shixu; Fu Li; (6 pag.)CN106810546; (2017); A;,
Quinuclidine – Wikipedia
Quinuclidine | C7H13N | ChemSpider

Ethyl quinuclidine-4-carboxylate, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.”22766-68-3

1-azabicyclo[2.2.2]oct-4-yl{bis[4-(methyloxy)phenyl]}methanol A solution of 4-(methyloxy)phenylmagnesiumbromide (0.5 M in THF, 6.5 mL, 3.25 mmol) was chilled down to 0 C. under Ar. Ethyl 1-azabicyclo[2.2.2]octane-4-carboxylate (0.1587 g, 0.866 mmol) in THF (4 mL) was slowly added to the reaction mixture at 0 C. over 20 min. The reaction was allowed to warm up to room temperature and then heated at 60 C. for 16 h. The reaction was chilled in an ice bath, quenched with saturated NH4Cl, and concentrated under vacuum. The resulting residue was treated with H2O and extracted with EtOAc. The combined organic layers were dried with MgSO4, filtered, and concentrated under vacuum to yield the desired product (0.273 g, 89.0%). EI-MS m/z 354(M+H+) Rt (1.74 min).

The chemical industry reduces the impact on the environment during synthesis, Ethyl quinuclidine-4-carboxylate, , I believe this compound will play a more active role in future production and life.

Reference£º
Patent; Laine, Damane I.; Palovich, Michael R.; McCleland, Brent W.; Neipp, Christopher E.; Thomas, Sonia M.; US2007/185155; (2007); A1;,
Quinuclidine – Wikipedia
Quinuclidine | C7H13N | ChemSpider

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.40117-63-3, Quinuclidine-4-carboxylic acid hydrochloride it is a common compound, a new synthetic route is introduced below.40117-63-3

(Quinuclidin-4-yl)carboxylic acid was prepared from 4-cyanoquinuclidine (Oakwood Products) following the procedure of Grob and Renk, Helv. Chim. Acta, 37, 1681 (1954). To a stirred suspension of quinuclidine-4-carboxylic acid hydrochloride (100 mg, 0.523 mmol) in 3 mL of anhydrous tetrahydrofuran at 0 C. was added borane methylsulfide complex (42 mg, 0.553 mmol). The mixture was stirred at room temperature for 1 hr and heated to reflux overnight. The reaction was cooled to 0 C. and carefully treated with 1 mL of methanol. The solvent was then removed under reduced pressure to leave the desired alcohol. Yield 36 mg. MS (m/e): 141.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand Quinuclidine-4-carboxylic acid hydrochloride reaction routes.

Reference£º
Patent; CoMentis, Inc.; BILCER, Geoffrey M.; NG, Raymond; (104 pag.)US2016/9706; (2016); A1;,
Quinuclidine – Wikipedia
Quinuclidine | C7H13N | ChemSpider